Langsung ke konten utama

CURRENT TRANSFORMERS

PRESENTATION
The CTs from Schneider Electic are suitable for use in the entire low voltage field, 40 to 6000A.

Operation:
The primary current can be measured in two ways:
CT with let-through primary
CT with connection of primary by screw and nut
Advantages
a broad selection of ratings:from 40 to 6000A
safety:sealable insulating cover
installation:on symmetrical DIN rail, on mounting plate, on busbar.

BENEFITS
The PowerLogic range of CTs is a comprehensive range suited to:
all current measurements from 40A to 6000A.
DIN rail, flush-mounted and busbar installation

APPLICATION
The CT current transformers deliver at the secondary a current (0-5 A) proportional to the current measured at the primary. This means that they can be used in combination with measurement devices (switchboard instrumentation, kilowatt-hour meters, power-monitoring units, etc.)


Call us :
PT. OODS ERA MANDIRI
Address :
1.      Jl. Abulyatama, komplek Ruko Manalagi Blok C no 10, Batam Kota, 29464, Kepulauan Riau, Indonesia
2.      Jl. Duta Boulevart Barat, Ruko D-Smart Blok F no 31, Duta Harapan Bekasi, Jakarta, Indonesia
Telp : +62 778-475-467 (Batam) , +62 21-8889-6442 (Jakarta)
Sales Number :
082173332233
082288303338
085836000151
Email : oodsgroups@gmail.com
Website : www.oodsgroups.com
IG: oodsgroups
FB: oods era mandiri
Linked : Oods Era Mandiri

Komentar

Posting Komentar

Postingan populer dari blog ini

POWERLOGIC PM5000

PRESENTATION The PowerLogic PM5000 series power meters are the new benchmark in affordable, precision metering. It is the ideal fit for high-end cost management applications, providing the measurement capabilities needed to allocate energy usage, perform tenant metering and sub-billing, pin-point energy savings, optimize equipment efficiency and utilization, and perform a high level assessment of the power quality in an electrical network. Characteristics Accuracy class 0.2S (PM5500 models) and 0.5S (PM5100, PM5300 models) for active energy metering Compliance to regulations EN50470-1/3 (MID), IEC 61557-12, IEC 62053-21/22, IEC 62053-23 Dual Ethernet ports (PM5500 models) to daisy chain meters together - less wiring, simpler installation Ethernet-to-serial gateway functionality Onboard web pages (PM5500 models) for viewing real-time and logged information Cyber security enhancements to help ensure data integrity Data logging (PM5300, PM5500 models) locally in non-volatile mem...
Posting Komentar
Baca selengkapnya

POWER LOGIC ENERCEPT

PRESENTATION The PowerLogic Enercept meter’s three interconnected, easy-to-install split-core CTs combines highly accurate digital metering and communications electronics inside one of the CT housings. This innovative form factor eliminates the need for a separate meter enclosure, which could reduce installation costs by as much as 70 percent. There are two meter versions available: Enhanced - delivers 26 energy parameters, including volts, amps, power factor and reactive power Basic - reports power and energy Characteristics Precision metering electronics and current transformers in a single package Easy to install split-core CTs High accuracy ±1% of reading from 10-100% of the rated current of the CTs Employs Modbus RTU communication protocol and easily integrates into an existing network Uses RS-485 wiring which simplifies installation and integration into an existing network BENEFITS Since the meter is inside the CT and no external PTs are required, the PowerLogic Ene...
Posting Komentar
Baca selengkapnya

POWERLOGIC BCPM

PRESENTATION The PowerLogic BCPM is a highly accurate, full featured metering product designed for the unique, multi-circuit and minimal space requirements of a high performance power distribution unit (PDU) or remote power panel (RPP). The BCPM monitors up to 84 branch circuits and the incoming power mains to provide information on a complete PDU. Full alarming capabilities ensure that potential issues are dealt with before they become problems. The BCPM has a solid-core CT option and a split-core CT option. There are three feature sets with each option: Advanced: power and energy per circuit and mains Intermediate: current per circuit, power and energy per mains Basic: current only per circuit and mains Characteristics Monitor 42 or 84 circuits with 2 or 4 solid-core CT strips Monitor up to 84 circuits with individual split-core CTs Supports single phase and 3-phase circuit metering Monitor mains with two sets of inputs for four auxiliary CTs Set alarm levels at High-high,...
Posting Komentar
Baca selengkapnya