Langsung ke konten utama

ACCU SWP

PRESENTATION
Global compensation or individual harmonic compensation, from H2 to H50, global or selective
Reactive compensation: power factor correction, cos φ to near unity, selectable set point.
Electrical systems: 3-wire or 4-wire.
Neutral current correction: 3 times unit rating.
Product standards: CE Certified.
Parallel capability: up to 4 like units.
Enclosure type: IP20, wall mounted.
Communication: 3 dry (voltage free) contacts to monitor status from remote location; Standard RS422/485 link for J-Bus and Modbus.
Functionality: harmonic mitigation or power factor correction, separately or combined.
Human Machine Interface: graphic display, seven languages.
Technical Data

System input
Nominal voltage: 400 V -20 + 15%; other voltages with transformer
Nominal frequency: 50Hz, 60 Hz, +/-8%
Number of phases: 3 phases with or without neutral


Technical characteristics
Compensated harmonic currents: H2 to 50, full compensation or individual compensation.
Fast response at < 2 cycles
Overload: possibility of continuous operation with current limitation.


Environmental conditions
0 °C to 40 °C continuous (derate 2 %/1 °C to 50 °C)
Relative humidity: 0 to 95 % without condensation
Operating altitude: < 1000 m, (derate 1 %/100 m above)
Reference technical standards: IEC/EN

BENEFITS
SineWave is extremely compact. It can be wall-mounted or installed in a switchgear cubicle;
SineWave can be connected in parallel, allowing future increases in power demand without disconnecting the supply;
SineWave adapts automatically to any single-phase or three-phase load: computer load, variable speed drives, etc. It is compatible with any type of neutral systems.
APPLICATION
By neutralising harmonics SineWave eliminates:

nuisance tripping of circuit-breakers,
Premature ageing of equipment.
By correcting the cos., SineWave allows:

energy savings,
Full compatibility of generator sets with capacitive loads


Call us :
PT. OODS ERA MANDIRI
Address :
1.      Jl. Abulyatama, komplek Ruko Manalagi Blok C no 10, Batam Kota, 29464, Kepulauan Riau, Indonesia
2.      Jl. Duta Boulevart Barat, Ruko D-Smart Blok F no 31, Duta Harapan Bekasi, Jakarta, Indonesia
Telp : +62 778-475-467 (Batam) , +62 21-8889-6442 (Jakarta)
Sales Number :
082173332233
082288303338
085836000151
Email : oodsgroups@gmail.com
Website : www.oodsgroups.com
IG: oodsgroups
FB: oods era mandiri
Linked : Oods Era Mandiri

Komentar

Posting Komentar

Postingan populer dari blog ini

POWERLOGIC PM5000

PRESENTATION The PowerLogic PM5000 series power meters are the new benchmark in affordable, precision metering. It is the ideal fit for high-end cost management applications, providing the measurement capabilities needed to allocate energy usage, perform tenant metering and sub-billing, pin-point energy savings, optimize equipment efficiency and utilization, and perform a high level assessment of the power quality in an electrical network. Characteristics Accuracy class 0.2S (PM5500 models) and 0.5S (PM5100, PM5300 models) for active energy metering Compliance to regulations EN50470-1/3 (MID), IEC 61557-12, IEC 62053-21/22, IEC 62053-23 Dual Ethernet ports (PM5500 models) to daisy chain meters together - less wiring, simpler installation Ethernet-to-serial gateway functionality Onboard web pages (PM5500 models) for viewing real-time and logged information Cyber security enhancements to help ensure data integrity Data logging (PM5300, PM5500 models) locally in non-volatile mem...
Posting Komentar
Baca selengkapnya

POWER LOGIC ENERCEPT

PRESENTATION The PowerLogic Enercept meter’s three interconnected, easy-to-install split-core CTs combines highly accurate digital metering and communications electronics inside one of the CT housings. This innovative form factor eliminates the need for a separate meter enclosure, which could reduce installation costs by as much as 70 percent. There are two meter versions available: Enhanced - delivers 26 energy parameters, including volts, amps, power factor and reactive power Basic - reports power and energy Characteristics Precision metering electronics and current transformers in a single package Easy to install split-core CTs High accuracy ±1% of reading from 10-100% of the rated current of the CTs Employs Modbus RTU communication protocol and easily integrates into an existing network Uses RS-485 wiring which simplifies installation and integration into an existing network BENEFITS Since the meter is inside the CT and no external PTs are required, the PowerLogic Ene...
Posting Komentar
Baca selengkapnya

POWERLOGIC BCPM

PRESENTATION The PowerLogic BCPM is a highly accurate, full featured metering product designed for the unique, multi-circuit and minimal space requirements of a high performance power distribution unit (PDU) or remote power panel (RPP). The BCPM monitors up to 84 branch circuits and the incoming power mains to provide information on a complete PDU. Full alarming capabilities ensure that potential issues are dealt with before they become problems. The BCPM has a solid-core CT option and a split-core CT option. There are three feature sets with each option: Advanced: power and energy per circuit and mains Intermediate: current per circuit, power and energy per mains Basic: current only per circuit and mains Characteristics Monitor 42 or 84 circuits with 2 or 4 solid-core CT strips Monitor up to 84 circuits with individual split-core CTs Supports single phase and 3-phase circuit metering Monitor mains with two sets of inputs for four auxiliary CTs Set alarm levels at High-high,...
Posting Komentar
Baca selengkapnya