PRESENTATION
A complete solution for harmonic filtering that meets every harmonic standard around the world.
Can be operated as a displacement power factor correction and load balancing device independent of or in conjunction with harmonic mitigation.
Technical Data
Standard RMS output current ratings
60 A, 120 A, 200 A, 300 A - 380 V AC to 480 V AC
47 A, 94 A, 157 A, 235 A - 480-600 V AC
40 A, 80 A, 133 A , 200 A - 600-690 V AC
Nominal voltage
380-480 V AC; +10%/-15%
480-600 V AC; +10%/-15%
600-690 V AC; +10%/-15%
Up to 15kV with custom transformers
Nominal frequency
50/60 Hz, ±3 Hz auto sensing
Number of phases
3-phase, with or without neutral
Spectrum cancellation
2nd to 51st, discrete; fully selectable per harmonic order (amplitude and on/off)
Harmonic Attenuation
Closed Loop: < 3 % THD(i); max 20:1 THD(i) reduction with load harmonic current above 50 % of AccuSine PCS+ rating
Open Loop: < 5 % TDD
Requires 3 % or higher inductive impedance per nonlinear load
Power factor correction
Optimized unity PF, Leading (capacitive) or lagging (inductive) power factor (Cos φ) to target
Mains current balancing
Negative sequence current injected to balance fundamental current on the mains due to load imbalance (inherently corrects displacement PF (Cos φ))
Control response time
25 μs
Harmonic correction time
2 cycles
Reactive correction time
1/4 cycle
Operating Temperature
60 A, 120 A & 200 A: IP00, IP20, UL Type Open, & UL Type 1 configurations -0 °C to 45 °C
All others 0 °C to 40 °C
Derate 2 % per degree °C to 50 °C
Relative humidity
to 95 %, noncondensing
Operating Altitude
1000 m (derate 1 %/100 m above), max 4800 m
Standards compliance/ certification
cULus (UL508 , CSA 22.2 No. 14)
CE Certified, ABS, Lloyds, other local standards
Display
144 mm QVGA TFT 64k-color touchscreen
-
BENEFITS
Flexible and scalable:
All types of harmonic producing loads
Single load, bus or global site filtering
Compatible with future load changes
Easy sizing and independent of system impedance
Simple selection online tool
Simple installation and ease of expansion
Flexible parallel operation modes for multi-unit installations
Current transformers can be installedon the incoming mains (source sense) or on the feeders to the loads (load sense) for maximum installation flexibility
Peace of mind:
Achieves compliance with any harmonic standard anywhere around the world when sized correctly
Compatible with generator sources - off loads generators of reactive and harmonic current demands to extend life and ensure proper operation of generators
Compatible with UPS sources: relieves UPS of reactive and harmonic current demands to ensure proper operation of UPS
Ensures energy efficiency by optimising transformer and cable capacities; reduces utility power factor penalties; and saves the cost of generation and transmission of reactive and harmonic current (non active currents)
Maximises up time when used for harmonic and/or power factor correction.
APPLICATION
Anywhere nonlinear loads are present: water/wastewater facilities, HVAC systems, oil & gas platforms, petrochemical plants, port cranes, mining, pharmaceuticals, pulp & paper, automotive plants, all-electric ships, wind mill and solar farms, steel mills, plastic extrusion plants, and more.
Stop voltage sags and flicker due to load current fluctuations (VAR compensation): Ball mills, shredders, arc welders, arc furnaces, hard to start AC motors, and more.
A complete solution for harmonic filtering that meets every harmonic standard around the world.
Can be operated as a displacement power factor correction and load balancing device independent of or in conjunction with harmonic mitigation.
Technical Data
Standard RMS output current ratings
60 A, 120 A, 200 A, 300 A - 380 V AC to 480 V AC
47 A, 94 A, 157 A, 235 A - 480-600 V AC
40 A, 80 A, 133 A , 200 A - 600-690 V AC
Nominal voltage
380-480 V AC; +10%/-15%
480-600 V AC; +10%/-15%
600-690 V AC; +10%/-15%
Up to 15kV with custom transformers
Nominal frequency
50/60 Hz, ±3 Hz auto sensing
Number of phases
3-phase, with or without neutral
Spectrum cancellation
2nd to 51st, discrete; fully selectable per harmonic order (amplitude and on/off)
Harmonic Attenuation
Closed Loop: < 3 % THD(i); max 20:1 THD(i) reduction with load harmonic current above 50 % of AccuSine PCS+ rating
Open Loop: < 5 % TDD
Requires 3 % or higher inductive impedance per nonlinear load
Power factor correction
Optimized unity PF, Leading (capacitive) or lagging (inductive) power factor (Cos φ) to target
Mains current balancing
Negative sequence current injected to balance fundamental current on the mains due to load imbalance (inherently corrects displacement PF (Cos φ))
Control response time
25 μs
Harmonic correction time
2 cycles
Reactive correction time
1/4 cycle
Operating Temperature
60 A, 120 A & 200 A: IP00, IP20, UL Type Open, & UL Type 1 configurations -0 °C to 45 °C
All others 0 °C to 40 °C
Derate 2 % per degree °C to 50 °C
Relative humidity
to 95 %, noncondensing
Operating Altitude
1000 m (derate 1 %/100 m above), max 4800 m
Standards compliance/ certification
cULus (UL508 , CSA 22.2 No. 14)
CE Certified, ABS, Lloyds, other local standards
Display
144 mm QVGA TFT 64k-color touchscreen
-
BENEFITS
Flexible and scalable:
All types of harmonic producing loads
Single load, bus or global site filtering
Compatible with future load changes
Easy sizing and independent of system impedance
Simple selection online tool
Simple installation and ease of expansion
Flexible parallel operation modes for multi-unit installations
Current transformers can be installedon the incoming mains (source sense) or on the feeders to the loads (load sense) for maximum installation flexibility
Peace of mind:
Achieves compliance with any harmonic standard anywhere around the world when sized correctly
Compatible with generator sources - off loads generators of reactive and harmonic current demands to extend life and ensure proper operation of generators
Compatible with UPS sources: relieves UPS of reactive and harmonic current demands to ensure proper operation of UPS
Ensures energy efficiency by optimising transformer and cable capacities; reduces utility power factor penalties; and saves the cost of generation and transmission of reactive and harmonic current (non active currents)
Maximises up time when used for harmonic and/or power factor correction.
APPLICATION
Anywhere nonlinear loads are present: water/wastewater facilities, HVAC systems, oil & gas platforms, petrochemical plants, port cranes, mining, pharmaceuticals, pulp & paper, automotive plants, all-electric ships, wind mill and solar farms, steel mills, plastic extrusion plants, and more.
Stop voltage sags and flicker due to load current fluctuations (VAR compensation): Ball mills, shredders, arc welders, arc furnaces, hard to start AC motors, and more.
Call us :
PT. OODS ERA MANDIRI
Address :
1. Jl. Abulyatama, komplek Ruko
Manalagi Blok C no 10, Batam Kota, 29464, Kepulauan Riau, Indonesia
2. Jl. Duta Boulevart Barat, Ruko D-Smart Blok F no 31, Duta
Harapan Bekasi, Jakarta, Indonesia
Telp : +62 778-475-467 (Batam) , +62 21-8889-6442 (Jakarta)
Sales Number :
082173332233
082288303338
085836000151
Email : oodsgroups@gmail.com
Website : www.oodsgroups.com
IG: oodsgroups
FB: oods era mandiri
Linked : Oods Era Mandiri
Komentar
Posting Komentar